2-Channel Voice Dialer
- Compact, clean
styling
- Interfaces to most
systems and radio security consoles
- Calls up to four
numbers per channel
- Programmable dialing
delay to prevent false alarms
- Fast, simple
programming
- On line testing
- Listen-in feature
- Two voice messages
can be recorded and stored
- Dials pagers and
sends numeric message
- Dial tone detection
capability
- 120 second delay
option permits redundant voice reporting on same telephone
line with systems that include digital communicator
- 4" W x 5" H x 1" D
|
Specifications: |
The
PD-2 2-Channel Voice Dialer is designed to connect to security
or personal emergency systems. Two voice messages (each up to 10
seconds long) can be recorded into the dialer's digital memory.
Each dialer channel can dial up to four telephone numbers to
play its message.
When triggered (by grounding one of the two inputs), the dialer
begins its communication sequence. After a 15 second delay, the
dialer will attempt to call the first telephone number
programmed for the channel triggered. The dialer will go
off-hook and try to detect a dial tone. After the dial tone is
detected, the unit will start dialing. If no dial tone is
detected for five seconds, the dialer goes on-hook, waits for
three seconds; goes off-hook, then tries to detect a dial tone
again. If no dial tone is detected on the second try, the call
to the first telephone number is aborted and the dialer will
attempt to call the next telephone number.
In the case of a false alarm, the 15 second start-up delay gives
the user time to cancel the message before it's sent by pressing
the dialer's STOP button. The start-up delay can be set for 0,
15, 30, 60 or 120 seconds. The 120 second delay option allows
the dialer to be used for redundant voice reporting on the same
system and telephone line with a faster triggering digital
communicator.
Five seconds after dialing, the unit begins playing the voice
message for the channel triggered. The message repeats for 60
seconds. During the message, the dialed party can stop the
communication sequence and prevent the dialer from calling the
next telephone number by pressing any key on their telephone
keypad. If a pager number is programmed, no voice message is
played for that telephone number
Operating Manual |
Application Example with
optional PLC Controller
|
Application
HVAC/building controls
Energy
Management Systems (EMS)
Enthalpy
control
Indoor Air
Quality (IAQ)
Clean rooms
Museums/archives
Hospitals/labs
Refrigeration control
Pharmaceutical
Animal
rooms
Food
Storage
|
