PIR Motion Detector
 Safe  Range Remote Digital Control System 1 Channel TRANSMITTER

936021  $159.99

Up to 700 Feet of Line-of-Sight Range  Features  Complete RF Supervision  Alarm, Supervisory, and Low Battery Transmissions  PIR fresnel lens 24  9V Battery Supplied SPECIFICATIONS  Dimensions: 3.3 in L x 1.75 in W x 4.0 in H (81 x 41 x 112 mm)  Power: 9VDC Alkaline battery (supplied)  Current Consumption: Standby -- 3 mA; Alarm -- 15 mA average while transmitting  Battery Life: Two years typical  Over one million factory pre-set codes are available and all receivers "learn" the transmitter ID Operating Frequency: 315 MHz

 In a typical installation, the motion detector is mounted indoors in a corner or on a wall between six and eight feet high. The sensor will monitor the infrared level in its detection pattern. If the level increases or decreases rapidly (as when a person or animal moves through the area) the transmitter triggers, sending an alarm signal to the receiver. When the passive infrared sensor detects motion in its field of view, the transmitter sends a digitally coded wireless signal to its companion receiver.
 
 Compatible Receivers: 936004   936008   936002