AM Products
View CartContactHelp
AM

 

APPLICATIONS
   
 Wireless Pump Control, Lighting Control, Signal or Alarm.

 


   Base Transmitter 1 Channel

938711 $199.99
Special Order


 

  
Base Receiver  1 Channel

  938701  $199.99
Special Order

    Unlimited application single (1) channel wireless control

   • 3300 feet ( 1 km ) line of sight,  300 feet (100m) inside partially obstructed
 

   Ready and easy to install

  938711 Base Transmitter dry contact input  
   
  938701 Base Receiver relay output 1.A max 30V


 7 inch Antenna with 5ft.coax-cable & SMA connector (included)
 

 
Specifications
Operating Voltage: 12 VDC
Operating Temperature: -4° to +140° F (-20° to +60° C)
Number of Codes: 64000 codes, factory preset 16 BIT Digital
Configuration: FCC CFR part 15.247
Transmission Power per FCC Part 15.249,  50mV/m @ 3m
Carrier Frequency 433MHz, industrial band Free
Current Transmitter Standby 70mA, transmitting 400mA
Current  Receiver Standby 70 mA, operation, 300mA
Data Input TX  Dry contact 
Relay Output 1.Amp max,  30V max  N/O  normally open
Antenna Impedance 50 Ohms Quarter Wave Antenna optional
Dimensions: 4.5"W x 5.5"H x 2.5"D (110 x 140 x 70 mm)
Weight 2 lb. (1 Kg) each
Enclosure  Receiver NEMA 3X Aluminum enclosure

 Operation  Transmitter: Close switch ---->   Receiver: Turn ON
 
Transmitter: Open switch ---->    Receiver: Turn OFF
  Wiring  Transmitter: 2 power wires, red - black, &  2 wires dry input contact
 Receiver:  2 power wires, red - black,  &  2 wires relay output --]  [--
.
DISCLAIMER:   Contact a licensed professional for your project or installation