Electronic latch control  12,  24  110/220 VAC/DC
Model: 934757 4160 . $99.99 Compatible products 2 Ch timer 4 Ch timer Contactors Wireless Guide    DIN Mount version   Momentary-to-Toggle (Bi-Stable) Switching Converter The LATCH module is an auxiliary device designed to allow easy and reliable arming/disarming momentary, two wire start stop circuit, or with hand-held wireless remote controls. It may be looked upon as an easy-to-use, cost-effective "momentary-to-toggle (bi-stable)" switching converter. Momentary closure of the terminals  2 and 5 will latch the relay. A subsequent momentary closure  will unlatch the relay. Reset the Toggle relay by removing power from terminal 2 or 10 Note: The LATCH module is also suitable for  remote control operations. The relay provides N.O. and N.C. contacts, and can therefore be used with a wide variety of control applications. Features - Specifications   TWO wire latch control ( toggle) The LATCH relay provides N.O. and N.C. outputs. Operating power - 12 VDC 24 VAC/DC and 110/220 VAC Current drain - less than 1mA (unlatched), 60 mA (latched). Relays switching capability – 10A /  250VAC. Auto reset by power removal 11 pin plug-in  and DIN mount  (included) 2 x 1.3 x 1.7 inches  ( 50 x 35 x 40 mm) Power ON and Latched indicator

DISCALIMER The applications shown here are referential help examples and ideas only, and are not intended for actual constructions plans
Contact a licensed professional. Electrodepot assumes no responsibility of the use of this  drawings