Remote Pump Control KIT

Electrodepot

Home

Checkout

Dealers

Support

Company

Wireless Pump Control

Single (1) Channel Remote Digital Pump Control KIT

Complete system with single channel Transmitter and Receiver for 2 Miles of Line-of-Sight range, 3000 foot with some obtructions.
Up to 10 Miles with optional Long Range Antenna

Special order include:
1 Transmitter 937111
1 Receiver 937011
1 931512 power relay 12VDC
2 Antennas, 8" w connector
2 Power adapters 12VDC
1 Wiring Diagram

OPERATION: Factory pre programmed
Pre programmer devices for a single float circuit application,
On contact closure (Low) sends a pulse to start the pump process,
On contact break (Stop) sends a pulse to stop the pump process,

Wiring diagram example
Wireless diagram electrodepot

> Optional Pump Control with overflow protection

SPECIFICATIONS 937111-937011

Operating Voltage: 12 to 15. VDC

Operating Temperature: -4° to +140° F (-20° to +60° C)

Receiver Type: Digital encoded-118 dB

Frequency 27,255 MHz

Codes: 65,536 DIP switch programming 16 bit

Current Drain Receiver 25 mA, standby, 145 mA operation
Transmitter 1 mA standby, 2 Amp 7 sec.

Data process Encoded Loop response 500 ms.

Relay Output 10 Amp max 30VDC - 250VAC N/0 and N/C

Antenna 50 Ohms Quarter Wave, Antenna optional

Dimensions each: 10 in L x 6 in W x 4 in D (250 x 150 x 100mm)

Weight 4.5 lb. (2 Kg) each

Enclosure Plastic NEMA4

Optional

Long Range Antenna Kit $79.99

Mechanical Float Switch $69.99

DISCLAIMER: Contact a licensed professional for your project.